Mini Sapir 2

The MINI SAPIR 2 is a compact professional central irrigation control.
It is an internet enabled controller for single irrigation head so the user can control everything from their PC or
Smartphone.
The MINI SAPIR 2 is the perfect cost-e8ective solution to suit small to medium irrigation projects and can be used in
various other
applications that require monitoring, remote controlling and alarms

Description

General Features

Modular & Flexible Hardware:
• Maximum 32outputs –Can be divided between local and radio RTU
• Local on-board:
o 6 Outputs – 12V DC Latch
o 4 Digital inputs – Water meter, fertilizer meters, DP, water level float and etc.
o 2 Analog inputs – Pressure sensor, ultrasonic water meter, tensiometer and etc.
• G5 Radio ready: –
o Master transceiver can be added directly to the main board o License free, up to 2.5 km (25 km with repeaters)
• Weather station–Supplying data for irrigation by ET, Frost protection and Rain shutdown
Irrigation:
• Up to 16 irrigation programs
• Water dosage by Time, Volume, Volume per area and ET
• Irrigation by days of the week or cycle of days
• Single cycle or pulse irrigation
• Start: by time, by condition, manually
• Flexible programming – Valve by valve, groups by group or combination of both
• Main valve operation delayed, advanced, or together with the irrigation valves
Fertilization:
• Up to 4 fertilizers injectors and a booster
• Fertilization modes: Time (h:m:s), Volume (Litres), Concentration L/m3, Proportional volume and pH & EC level § Three stage
fertigation: pre- watering, injection, post watering
Backflush:
• Flushing by time, by PD or by both
• Definable parameters: Flushing interval, Pre-dwell time, Dwell time, Flushing time, PD delay
• Endless looping detection and prevention
• Accumulation of flushing cycles by time and by PD
Alarms:
• High flow, Low flow, Water leakage, Low pressure
• Fertilizer leakage, No pulses from fertilizer injector
• PD sensor failure
• Low battery, No AC
Communication:
• NEW PC software, Java based – CONSOLE. Simple to use, powerful and modern
• NEW Smartphone application – SPOT. From any device on any operating system
• Possible communication channels: Wi-Fi, 4G modem
• Push alarm notifications to user phone
• Firmware upgrade via direct Wi-Fi
General:
• Multi language controller
• Local programming via Wi-Fi direct from smartphone / Tablet (No internet required)
• Dealer definitions allows tailor fitting each controller to each user specific application
• Flexible condition systems allow starting, stopping, waiting and continuing of irrigation programs
• Detailed event log for all system events
• Controller configuration and irrigation programs are saved on non-volatile memory
• Modern power ebicient charging mechanism, prolongs battery life and lowers consumption
Energizing options:
• 12V DC from a solar panel and a rechargeable battery
• 240vAC to 18cDC plug pacDOWNLOAD Manual and Brochure
à connect to downloads page
G5 Radio
The G5 radio RTU system offers a perfect solution for controlling distributed irrigation systems, when using cable is impossible or
undesirable. The system utilizes low transmission energy and therefore no licensing is required. Under good conditions, the distance
between two units in the communication chain can reach a distance of 3km, but the full coverage of the system is much bigger since the G5
RTUs can serve also as ROUTERs for other RTUs with up to 11 levels of repetition.
G5 RTU RF ECO
RTU ECONOMICAL
Available as;
1OUT/1IN, 2ANA [output 2-wire latch]
2OUT/2IN, 2ANA [output 2-wire latch]
Energy Option;
4 C sized batteries OR 1.3Amp/hr battery with 5watt solar panel
* Solar and rechargeable batteries must be used if the RTU is a repeater OR using the
analogue/SDI inputs.
G5 RTU RF Modular
RTU MODULAR
Available as;
2,4,6,8 OUT/4, 8 IN
Analogue option: 4 digital 1ANA
Energy Option;
4 D Sized batteries OR 2.3Amp/hr battery with 5watt solar panel
* Solar and rechargeable batteries must be used if the RTU is a repeater OR using the
analogue/SDI inputs.
LIN EXPANSION: SDI
LIN EXPANSION: 4ANA
LIN EXPANSION: PH-EC
RTU SDI-12
Any SDI sensor can be connected to this RTU as long as the sensor information is already on our database.
Energy Option;
1.3Amp/hr battery with 5watt solar panel
RTU 4ANA
This RTU can take a 4 analogue sensor 4-20mA OR 0-5V.
Energy Option;
1.3Amp/hr battery with 5watt solar panel

Download product specification