Description
General Features
Modular G Flexible Hardware:
- Maximum 32outputs –Can be divided between local and radio RTU
- Local on-board:
- 6 Outputs – 12V DC Latch
- 4 Digital inputs – Water meter, fertilizer meters, DP, water level float and
- 2 Analog inputs – Pressure sensor, ultrasonic water meter, tensiometer and
- G5 Radio ready: –
o Master transceiver can be added directly to the main board o License free, up to 2.5 km (25 km with repeaters)
- Weather station–Supplying data for irrigation by ET, Frost protection and Rain shutdown
Irrigation:
- Up to 16 irrigation programs
- Water dosage by Time, Volume, Volume per area and ET
- Irrigation by days of the week or cycle of days
- Single cycle or pulse irrigation
- Start: by time, by condition, manually
- Flexible programming – Valve by valve, groups by group or combination of both
- Main valve operation delayed, advanced, or together with the irrigation valves
Fertilization:
- Up to 4 fertilizers injectors and a booster
- Fertilization modes: Time (h:m:s), Volume (Litres), Concentration L/m3, Proportional volume and pH C EC level Three stage fertigation: pre- watering, injection, post watering
Backflush:
- Flushing by time, by PD or by both
- Definable parameters: Flushing interval, Pre-dwell time, Dwell time, Flushing time, PD delay
- Endless looping detection and prevention
- Accumulation of flushing cycles by time and by PD
Alarms:
- High flow, Low flow, Water leakage, Low pressure
- Fertilizer leakage, No pulses from fertilizer injector
- PD sensor failure
- Low battery, No AC
Communication:
- NEW PC software, Java based – CONSOLE. Simple to use, powerful and modern
- NEW Smartphone application – SPOT. From any device on any operating system
- Possible communication channels: Wi-Fi, 4G modem
- Push alarm notifications to user phone
- Firmware upgrade via direct Wi-Fi
General:
- Multi language controller
- Local programming via Wi-Fi direct from smartphone / Tablet (No internet required)
- Dealer definitions allows tailor fitting each controller to each user specific application
- Flexible condition systems allow starting, stopping, waiting and continuing of irrigation programs
- Detailed event log for all system events
- Controller configuration and irrigation programs are saved on non-volatile memory
- Modern power efficient charging mechanism, prolongs battery life and lowers consumption
Energizing options:
- 12V DC from a solar panel and a rechargeable battery
- 240vAC to 18cDC plug pac
G5 Radio
The G5 radio RTU system offers a perfect solution for controlling distributed irrigation systems, when using cable is impossible or undesirable. The system utilizes low transmission energy and therefore no licensing is required. Under good conditions, the distance between two units in the communication chain can reach a distance of 3km, but the full coverage of the system is much bigger since the G5 RTUs can serve also as ROUTERs for other RTUs with up to 11 levels of repetition.
G5 RTU RF ECO RTU ECONOMICAL
Available as;
1OUT/1IN, 2ANA [output 2-wire latch] 2OUT/2IN, 2ANA [output 2-wire latch] Energy Option;
4 C sized batteries OR 1.3Amp/hr battery with 5watt solar panel
- Solar and rechargeable batteries must be used if the RTU is a repeater OR using the analogue/SDI inputs.
G5 RTU RF Modular RTU MODULAR
Available as; 2,4,6,8 OUT/4, 8 IN
Analogue option: 4 digital 1ANA
Energy Option;
4 D Sized batteries OR 2.3Amp/hr battery with 5watt solar panel
- Solar and rechargeable batteries must be used if the RTU is a repeater OR using the analogue/SDI inputs.
LIN EXPANSION: SDI LIN EXPANSION: 4ANA LIN EXPANSION: PH-EC
RTU SDI-12
Any SDI sensor can be connected to this RTU as long as the sensor information is already on our database.
Energy Option;
1.3Amp/hr battery with 5watt solar panel
RTU 4ANA
This RTU can take a 4 analogue sensor 4-20mA OR 0-5V. Energy Option;
1.3Amp/hr battery with 5watt solar panel